How to Use a Circular Saw

As with any other power tool, a circular saw can be quite handy in the workshop provided you know how to use it. However, these tools can also be extremely dangerous if you don’t know how to handle them. A circular saw will easily cut off your fingers or something else if you are not paying attention while using it. These saws are quite tricky to use effectively and safely.

Tips for How to Use a Circular Saw

Circular saws, like other power saws, require that you move the saw through the materials you want to cut, rather than moving the materials through it. This opens a lot of loopholes for things to go wrong if you are not too careful. That said, this article provides you the most effective ways to learn how to use a circular saw appropriately.

Make Accurate Marks

Before you begin using the saw, start by making accurate marks on the material you plan to cut. This helps to ensure that you get an accurate cut. A good tape measure and pencil should do it. The marks help you from straying when using the saw.

Watch the Blade, Not the Lines

When cutting, remember to watch the blade at all times. You will get better results watching the actual blade than the guides and lines. This way, you easily tell whether the blade is straying. Also, as you cut, sawdust can easily cover the lines and prevent you from seeing where to cut. But a light puff can help keep your view clear. Other circle saws also come with built-in blowers to make work easier.

Clamp Before Cutting Angles

Most blade guards hang up on the wood when cutting. And being as you need one hand to push the wood while the other retracts the guard, you need to clamp the workpiece down to prevent it from moving around. You can even use your knee to make the workpiece stay in position.

Use Safety Gear

Safety glasses, earmuffs, ad dust masks are a few of the essential safety gear to use when cutting wood. Appropriate safety gear helps make you more comfortable while working. You don’t want to inhale all the sawdust or blink and squint when cutting to prevent sawdust from getting into your eyes. Protection against the noise is also just as important to prevent you from making a sloppy cut.

Making Nonbinding Compound Cuts

Compound steep angles require that you pull the guard back from the blade when cutting. Ensure that you follow this step each time you’re making compound cuts. Otherwise your bound will most likely get bound up when entering the cut which will make it impossible to continue cutting.

Cutting Curves

When used right, circular saws do a sterling job for making gradual curves. They even outperform jigsaws being as they offer a much smoother cut and in a fraction of the time as well. Circle saws, however, can only make most of the shallow circular cuts. If you are looking to make deep cuts, then you will need to stick to the jigsaw.

Cutting Pipe

A circular saw can make short work of any pipe material, except cast iron pipes. A fine-tooth carbide blade is excellent for copper, ABS or PVC pipes. If, however, you’re looking to cut steel pipes or metal plumbing pipes, then a metal-cutting blade will do. The best way to cut metal is usually to use a miter saw but the correct blade will work for a circular saw.

Final Thoughts

It’s evident from the above context that a circular saw can be a pretty useful tool, but only when used properly. It can perform a myriad of functions both in the workshop and at home. But then, it can also be very dangerous if not used appropriately. Follow this guide to get started using this amazing tool properly.

Home Improvement Tips for Working with a Circular Saw

Knowing the ins and outs of any power tool is a vital step when looking to use them safely and effectively. A circular saw falls in the list of power tools that are very helpful when used appropriately. However, they can also be quite dangerous machines, especially when used recklessly. That’s why we want you to be educated on working with a circular saw.

Even with the best circular saw on the market, it’s only as good as the person using it. With a few home improvement tips and instructions, you can make the most of your circular saw and do some good work with it. A few sessions and training should do it. So, if you are looking to learn more about how to work with circular saws, read on.

The Basics of Working with a Circular Saw

Circular saws are excellent tools for making quick and clean straight cuts across boards called crosscuts. They also perform well for making longer cuts along board lengths called rips. These saws are great for making bevel cuts as well, a bonus function.

Circular saws come with a set of standard features which include:

  • Footplate
  • Retractable blade guard
  • Bevel adjustment
  • Depth adjustment setting

Circular Saw Designs

Inline or sidewinder saws are the most common circular saws. The motor in the inline saw is located in line with the blade, thus its name. These blade spin very fast, around 6,00 rpm.

The warm dive saw is another circular saw type. Their motors are located at their rear, positioned at a 90-degree angle to the blade. A gear spins the blade. Thus, they don’t spin as fast. However, this allows for more torque, which makes them a better option for heavy-duty jobs. They also tend to be quieter, less compact, and lighter than sidewinders.

Circular Saw Sizes

Circular saw sizes are classified using the blade diameter, with the most common sizes being between 5.5 to 7.25 inches. Generally, the size of the circular saw you need depends on the type of project you plan to use the saw on.

Circular Saw Blades

The blade is perhaps the most vital component of the saw. Different projects require you use different types of blades. It is also important to note that the type of blade you choose needs to be compatible with the saw you plan to use.

The types of saw blades include:

  • Diamond-tipped blades for cutting ceramic tile
  • Blades with carbide-tipped teeth
  • High-speed tipped blades
  • Blades made using rough, abrasive materials for masonry work

Remember, a blade can work optimally if you use it on the right saw, and depending on the project you use it on. The frequency of use is also a crucial factor.

Circular Saw Power Sources

There are two types of power supplies for circular saws;

1. Corded Power Supply

These saws are excellent for jobs that need a lot of steady power. Projects that involve cutting steel, masonry projects, and cutting wood continuously require the use of corded circular saws. These saws also don’t depend on batteries. So, you should be good provided you can access an outlet. These saws use extension cords to accommodate different workstations.

2. Cordless Power Supply

These saws are perfect for mobility and convenience. They are also great for workstations and projects where extension cords aren’t practical. These saws are power limited because they use batteries to function. This makes them great for cutting wood and other lighter projects. Tougher materials like metal and brick, run down their batteries quickly.

Final Thoughts on Circular Saws

A proper tool and set of materials are what determine the success of a project. Being that circular saws are necessary for most projects, you must equip yourself with the right information for working with circular saws, finding the right saw to shop for, and use the right circular saw appropriately.

Featured Reviews
Related Posts
Recent Posts
DIY Home Tips
Using Electric Space Heaters

Safety Tips For Using Electric Space Heaters

Electric space heaters work as convenient sources of heat when temperatures drop...   Read More

using emergency generators

Tips for Using Emergency Generators

Nothing can ruin a busy day like having your power go out, especially at night,...   Read More

mounting decor on the wall

Tips for Mounting Decor On the Wall

It is the simple things we do in our homes that tell the true story of who we ar...   Read More

tips for insulating walls

Home Improvement Tips for Insulating Walls

One of the best ways of increasing energy efficiency in your homes is installing...   Read More

Newsletter Signup

Stay in the loop with the latest deals and DIY projects!